99久久国产综合精品成人影院-99久久国产综合精品麻豆-99久久国产综合精品女不卡-99久久国产综合精品女小说-99久久国产综合精品网成人影院-99久久国产综合精品五月天

The imaging equipment configuration tool (ctfid) of Bosch Security system improves the efficiency of CCTV installation and maintenance personnel. Ctfid uses bilinx technology. The technology is a two-way communication method and has been embedded in all the latest analog Bosch dinion, flexidome, autodome and Mic series cameras. With ctfid, technicians can check status, change settings, control pan / pitch / Zoom (PTZ), and even update firmware from anywhere via video cable. This saves troubleshooting and maintenance time, while providing more accurate settings and adjustments, and all operations do not require the use of additional wires or junction boxes. Simply connect the configuration tool's coaxial cable to the laptop's USB adapter. You can then access all camera or spherical camera settings. Since bilinx technology uses standard video signals to transmit and receive data, it can work with any passive UTP installation. The ctfid comes with a small hardware adapter that can be plugged into any USB standard port supported by the windows? Operating system. After loading the ctfid software, the adapter communicates through the video signal of any bilinx enabled camera or autodome camera. This allows the maintainer to access the video cable at any convenient location between the camera and the monitoring station using a simple T-connector. If unshielded twisted pair (UTP) is selected as the medium, the data can still be accessed (if a passive UTP transceiver is used). Installers or technicians can change any or all camera / dome settings, such as white balance, AGC, shutter speed, etc., in online mode while connected to the device. In addition, the user can download and save the data first, so as to process the data and upload the data to the same or similar device, thus completing the above operation in offline mode. Ctfid saves a lot of time, whether it's a large installation with many cameras that requires only one setting to be changed, or a small installation with only one camera that requires all settings to be changed. Ctfid makes the PC keyboard a convenient user interface for typing in the correct settings of cameras or spherical cameras. This greatly simplifies many tasks, such as inputting the text descriptor on the screen, inputting the address setting of the spherical camera or browsing the camera menu. Ctfid allows easy transfer of camera or spherical camera firmware updates via video cable in the future. The installation personnel can update the function without removing the camera; all the updates can be carried out from a central location, without the need to update the camera site, so the maintenance cost is further reduced. The vp-cfgsft comes with a USB adapter and software. Vp-usb contains only USB adapter. Installing / configuring PC system requires video system 1024 x 768, 16 bit color Port USB 1.1 or higher processor with MMX ? Technology's 200 MHz Pentium (or equivalent) requires a minimum hard disk space of 50 MB and a minimum memory requirement of 256 MB

Sales telephone (same number of wechat): 13428785305 QQ: 2461903042